MF 375 Specifications
|
FRONT AXLE |
||
| Type | Heavy Duty Box Section, Adjustable | |
|
REAR AXLE AND BRAKES |
||
| Axle Type | Straddle with epicyclical reduction unit | |
| Brake Type | Oil immersed, multi-disc | |
| Brakes Actuation | Hydraulic | |
| Parking Brake | Hand lever operated | |
|
INSTRUMENTATION |
||
| Gauges | Tachometer, Hourmeter, Fuel level, Battery condition & Water temperature | |
| Warming lights | Direction indicators, Electric charge, Headlight main beam Low engine oil pressure Brake lights & Auxiliary socket | |
|
TYRES |
||
| Front | 7.50-16 (6PR) | |
| Rear | 16.9/14-30 (6PR) | |
|
TRACK ADJUSTMENT |
||
| Front axle | 1,271-1,881 mm | |
| Rear axle | 1,423-2,134 mm | |
|
WEIGHT AND DIMENSIONS |
||
| Weight | ||
|
Gross Weight
|
2,355 kg | |
| Dimensions | ||
| Wheel base | 2,170 mm | |
| Overall length | 3,670 mm | |
|
Width minimum
|
1,970 mm | |
| Height | ||
| -Over Exhaust | 2,485 mm | |
|
-Over Steering Wheel
|
1,730 mm | |
| Turning Circle | ||
| -With brakes | 7,260 mm | |
|
-Without brakes
|
8,095 mm | |
| Ground clearance | 465 mm | |
|
CAPACITIES |
||
| Fuel Tank | 108.0 L | |
| Engine sump | 7.5 L | |
| Cooling system | 15.2 L | |
| Hydraulic system | 36.0 L | |
| Steering box | 2.0 L | |
| Oil bath air cleaner | 0.7L | |
| Brake oil | 0.25 L | |
|
STANDARD EQUIPMENT |
||
| Weight frame without weights, Standard tool box with set of tools, Top link, Top link end Cat-I & II balls, Check chains, Stabilizer chains, Spring suspension seat, Flat top fenders & Operator's manual. | ||
|
OPTIONAL EQUIPMENT |
||
|
Front end weights, Swinging drawbar, Sun canopy, Pintle hook & 9 hole drawbar.
|
||
|
Note: The manufacturer reserves the right to change specifications without prior notice. |
||
|
PERFORMANCE |
||
| Maximum engine power @ 2,200 rpm/min |
75 (B.S.) hp
|
|
| Maximum torgue @ 1,400 rpm |
290 Nm
|
|
| Maximum PTO power at rated engine speed |
69.5 hp*
|
|
| Maximum PTO power at 540 rpm | ||
| * Certified to BS AU 141a (1971) | 63.0 hp | |
|
ENGINE |
||
| Make / Type |
Perkins
/ 4.248
|
|
| No. of cylinders |
4
|
|
| Injuction |
Direct
|
|
| Bore |
101mm
|
|
| Stroke |
127mm
|
|
| Capacity |
4.07
|
|
| Aspiration |
Natural
|
|
| Compression ratio |
16:1
|
|
| Starting aid |
Thermostart
|
|
| Throttle Control |
Hand and foot
|
|
| Cooling |
Water
|
|
| Air Cleaner Type |
Oil bath
|
|
| Air Pre-Cleaner |
Over bonnet
|
|
| Fuel filter |
Daul, High capacity
|
|
| Exaust |
Vertical, Muffler under bonnet
|
|
| Note: This is a premium heavy duty engine with tuffrided crankshaft for longer life in adverse conditions. | ||
|
ELECTRICS |
||
| Voltage | 12V, negative earth | |
| Battery | 110 Ah | |
| Starter | 2.8 kW | |
| Alternator | 45 Amp. | |
|
CLUTCH |
||
| Type | Dual | |
| Diameter | 305x254 mm | |
| Lining Material | Cerametallic | |
|
TRANSMISSION |
||
| Type |
Sliding spur
|
|
| Number of gears |
8 forward, 2 reverse
|
|
| Road speed at 2,000 engine rpm with 16.9/14x30 rear tyres |
|
|
| Gear |
Speed (kph)
|
|
| Forward 1 |
2.3
|
|
| Forward 2 |
3.4
|
|
| Forward 3 |
4.7
|
|
| Forward 4 |
6.3
|
|
| Forward 5 |
9.3
|
|
| Forward 6 |
13.6
|
|
| Forward 7 |
18.6
|
|
| Forward 8 |
25.0
|
|
| Reverse 1 |
3.2
|
|
| Reverse 2 |
12.7
|
|
|
POWER TAKE OFF |
||
|
Type |
Live
|
|
| Engine speed @ 540 PTO rpm |
1,789 rpm
|
|
| Shaft diameter |
35 mm
|
|
| No. of splines |
6
|
|
|
HYDRAULICS |
||
|
Functions
|
Draft Control, Position Control, Response Control, Constant Pumping |
|
| Pump Type |
Reciprocating Ferguson Pump |
|
| Maximum Oil Flow |
16.7 litre/min
|
|
| Maximum Pressure |
21Mpa(205 bars)at normal operating temperature |
|
| Max. lift capacity with lower links horizontal |
2,145 kg Cat. I & II with interchangeable balls
|
|
| 8.8 Km Sheikhupura Road, Lahore-Pakistan | |
| Phone: +92-42-7020248, Fax: +92-42-7942847 |