MF 385 4WD Specifications
|
REAR AXLE AND BRAKES |
||
| Axle Type | Straddle with epicyclic reduction | |
| Brake Type | Oil immersed, multi-disc | |
| Braking Area | 1,774 sq.cm. | |
| Brakes Actuation | Hydraulic | |
| Parking Brake | Hand lever operated | |
|
INSTRUMENTATION |
||
| Gauges | Tachometer, Hourmeter, Fuel level, Battery condition & Water temperature | |
| Warming lights | Direction indicators, Electric charge, Headlight main beam Low engine oil pressure 4WD indication light | |
|
TYRES |
||
| Front | 12.4-24 (6PR) | |
| Rear | 18.4/15-30 (6PR) | |
|
TRACK ADJUSTMENT |
||
| Front axle | 1,376-1,994 mm | |
| Rear axle | 1,423-2,134 mm | |
|
WEIGHT AND DIMENSIONS |
||
| (With 12.4-24 front & 18.4/15-30 pressed rear wheel and with full fuel, oil and water) | ||
| Weight | ||
| Weight front | 1,429 kg | |
| Weight rear | 1,582 kg | |
| Weight total | 3,011 kg | |
| Dimensions | ||
| Wheel base turning circle | 2,350 mm | |
| Overall length | 3,810 mm | |
| Width minimum | 1,871 mm | |
| Height | ||
| Over Exhaust | 2,485 mm | |
| Over Steering Wheel | 1,781 mm | |
| Turning Circle | ||
| Without brake | 8,518 mm | |
| Ground clearance | ||
| Under 4WD front axle | 395 mm | |
| Under gear box | 501 mm | |
|
CAPACITIES |
||
| Fuel Tank | 108.0 litre | |
| Engine sump | 7.5 litre | |
| Cooling system | 15.2 litre | |
| Hydraulic system | 47.4 litre | |
| Power steering reservoir | 2.0 litre | |
| 4WD front axle differential | 5.6 litre | |
| Hub each saide | 1 | |
| Oil bath air cleaner | 0.7 litre | |
|
STANDARD EQUIPMENT |
||
|
Chain stabilizers, Check chains, Set of tools. Weight frame without weights. Top link, Cat - I balls, .Operator's manual |
||
|
OPTIONAL EQUIPMENT |
||
|
Front end weight, PTO pulley, 9 hole draw bar. Sum Canopy. |
||
|
OPERATOR AREA |
||
| Seat | Cushioned | |
| Fenders | Flat top | |
| Tool | Standard | |
| Note: | ||
|
PERFORMANCE |
||
| Maximum engine power @ 2,200 rpm/min |
85 hp*
|
|
| Maximum torgue @ 1,600 rpm |
291 Nm
|
|
| Maximum PTO poser at 2,200 engine s |
70 hp** rpm
|
|
| * Certified to BS AU 141a | ||
| ** Manufacturer's estimate | ||
|
ENGINE |
||
| Make / Type |
Perkins
/ 4.41
|
|
| No. of cylinders |
4
|
|
| Injuction |
Direct
|
|
| Bore |
101mm
|
|
| Stroke |
127mm
|
|
| Capacity |
4.1
|
|
| Aspiration |
Natural
|
|
| Compression ratio |
15.3:1
|
|
| Starting aid |
Thermostar
|
|
| Throttle Control |
Hand and foot
|
|
| Cooling |
Water
|
|
| Air Cleaner Type |
Oil bath
|
|
| Air Pre-Cleaner |
Over bonnet, Air swirl
|
|
| Fuel filter |
Daul, High capacity
|
|
| Exaust |
Vertical, Muffler under bonet
|
|
| Oil Cooler |
Water Cooler
|
|
|
ELECTRICS |
||
| Voltage | 12V, negative earth | |
| Battery | 96 Ah | |
| Starter | 2.8 kW | |
| Alternator | 45 Amp. | |
|
CLUTCH |
||
| Type | Dual | |
| Diameter | 305x254 mm | |
| Lining Material | Cerametallic | |
|
TRANSMISSION |
||
| Type |
Sliding spur
|
|
| Number of gears |
8 forward, 2 reverse
|
|
| Road speed at 2,2oo engine rpm with 18.4/15-30 rear tyres |
|
|
| Gear |
Speed (kph)
|
|
| Forward 1 |
2.7
|
|
| Forward 2 |
3.7
|
|
| Forward 3 |
5.1
|
|
| Forward 4 |
6.8
|
|
| Forward 5 |
10.4
|
|
| Forward 6 |
15.2
|
|
| Forward 7 |
20.8
|
|
| Forward 8 |
27.9
|
|
| Reverse 1 |
3.5
|
|
| Reverse 2 |
14.1
|
|
|
POWER TAKE OFF |
||
|
Type |
Live
|
|
| Engine speed @ 540 PTO rpm |
1,789 rpm
|
|
| Shaft diameter |
35 mm
|
|
| No. of splines |
6
|
|
|
HYDRAULICS |
||
|
Functions
|
Draft Control, Position Control, Response Control, Constant Pumping |
|
| Pump Type |
4 - piston Ferguson Pump |
|
| Maximum Oil Flow |
16.7 litre/min
|
|
| Maximum Pressure |
21 MPa(205 bars)at normal operating temperature |
|
| Max. lift capacity with lower links horizontal |
2,145 kg Cat. I & II with interchangeable balls
|
|
|
STEERING |
||
| Type | Hydrostatic | |
|
4WD FRONT AXLE |
||
| Axle Type | Parallel drive | |
| Engagement | Machenical | |
| 8.8 Km Sheikhupura Road, Lahore-Pakistan | |
| Phone: +92-42-7020248, Fax: +92-42-7942847 |